Videovox Pro LNS series Uživatelský manuál stáhnout pdf (Strana 12)

2.3.3 Aperture Control

Aperture control is to control image light. Click OPEN or CLOSE key to modify.

Aperture will go back to auto mode after initialized or pan/tilt movement or

zoom.

2.3.4 Auto Backlight Compensation

This function allows you to balance brightness and darkness sections of the

image to produce a more vivid picture.

2.3.5 Auto White Balance

Automatically change color in accordance with environment light. Here you can

also modify manually.

2.3.6 Day/Night Switch

Automatically change camera mode between day/night to get vivid resolution.

In daytime camera is in color model and at night camera is in black and white

mode.

2.4 Preset and Recall

Preset function is to save the address information (such as PTZ pan/tilt, focus

and etc) to the memory so that users can quickly adjust the dome and PTZ to the

correct position. Here dome supports 80 presets.

2.5 Auto Touring

Add addresses into a routine in a desired order. Set time and stop duration for

each address. The dome will begin an auto touring between these addresses.

Here you can input maximum 80 presets in one touring.

2.6 Auto Scan

Auto scan is to scan selected area at the same frequency. Here you needs to set

left and right limit and interval. There are maximum five auto scan channels.

2.7 Auto Pattern

Auto pattern is to memorize PTZ movement and camera focus. From the starting

point, camera move around from the started point at the same interval.

2.8 Window Blanking (Privacy Mask)

Window blank is to hide some zones for privacy reasons. Please use OSD menu

to setup.

2.9 Alarm Input and Output

Here users can set 7 alarm input, alarm time and alarm clearance time.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 60 61

Žádné komentáře

Videovox Pro LNS series Uživatelský manuál Strana 12